6U, 80mm CompactPCI Rear I/O Prototyping Board.

The perfect board for developing mechanical and functional CompactPCI hardware designs.

• Plated holes for 2mm J1 - J5 pressfit connectors
• Plated holes for RJ45(3), DB25, & DB9 connectors
• Plated holes with traces connected to every connector pin (for monitoring signals or soldering components)
• Labeled bus bars for all cPCI voltages
• Additional bus bars for ground
• Prototyping area with plated holes on 0.1" grid

6U CompactPCI Prototyping Board with pressfit connectors, 2mm headers, and ejector handle.

J1-5 pressfit connectors loaded. Plated holes next to pressfit connectors are loaded with 2mm headers for easy connection to logic analyzer. Ejector handles/faceplate installed.
$249.00 | View Detail »

6U CompactPCI Extender

Supports both 32 and 64 bit transfers.

Multi-layer design with full ground and power planes.

All power rails fused with standard 3AG fuses.
$499.00 | View Detail »

3U CompactPCI 160mm Extender w/ Headers

Headers to make/break all signals. Multilayer design. 160mm in length. All connections are pin to pin to allow for custom electrical designs, while using the 3U mechanical form factor. Lead-free version.
$475.00 | View Detail »

3U CompactPCI 80mm Extender

Supports both 32 and 64 Bit transfers. Multilayer design.
$225.00 | View Detail »

6U CompactPCI 80mm Rear Extender

Designed for testing CompactPCI rear panel cards. Custom connector configuration available. Contact sales@twinind.com for connector options and price quote.
$398.00 | View Detail »

66MHz version of ZPCI.2400 6U CompactPCI Active Extender.

Test points for all cPCI signals and user I/O signals. PMC slot for on-board development and testing. Mechanical support for test card.
$2,295.00 | View Detail »

HE3660 - 6U cPCI Active Extender

Measurement and testing of CompactPCI assemblies in the 6 U Euro-board format is greatly facilitated by the use of these test adapters.

Optimal access to the test specimen is guaranteed because the adapter has plug-in connection on 3 sides.

The test specimen is securely held by the front and lateral guides.

The modern BRIDGE design permits up to 3 CompactPCI cards and one standard PCI card to be inserted in one CompactPCI slot.
$1,980.00 | View Detail »

cPCI to PCI Passive Adapter

PCI bracket for Additional Support.
Special Order | View Detail »

CompactPCI/PMC Development Board.

• Enables testing of CompactPCI products in standard PCI system
• ATX power connector allows use without PC
• Built-in 10A, 3.3v power supply for 5v only backplanes
• Support for 64bit/66MHz PCI
• Vertical (rear side) or horizontal (front side) PMC mounting area
• Debug headers for all PCI signals
• VME connector for access to PMC J14 I/O
• Local reset switch
• Fuses on all power inputs

• Altera FLEX,10K200 CPLD
• Full hot swap CompactPCI PIGMG 2.1-R2.0 compliant
• 6U form factor (1 slot thick)
• 32-bit and 64-bit PCI operation
• 5-volt or 3.3 -volt PCI board
• Operates on 33Mhz and 66Mhz CompactPCI bus
• Includes PLD Applications 32/64 -bit PCI IP cores free license for exclusive use with the CPCISYS boards.

2000-6U-BPNL

8 Slot 6U CompactPCI Backplane

6U, 8 Layer design with 2 full ground and 2 power planes. Seven peripheral slots and one system slot. Jumper selectable VIO power on all slots. Clock routing meets CompactPCI, revision 2.1 specification.

WEB SPECIAL!    $499.00

$739.00 | View Detail »